A mishap was averted at the airport in the national capital on Wednesday morning involving two Vistara planes as the air traffic controller inadvertently gave clearance for crossing and take off of two different aircraft on the same runway at the same time before cancelling the take off, according to officials.
Aviation regulator Directorate General of Civil Aviation (DGCA) will probe the incident and the air traffic controller concerned has been derostered, one of the officials told PTI.
A plane that had landed at the Delhi airport from Ahmedabad and another plane that was to take off to Bagdogra were involved in the incident.
A senior official at the DGCA said Vistara aircraft VT1926 operating the flight from Ahmedabad to Delhi was involved in the runway incursion.
The aircraft landed on runway 29L and was instructed by the air traffic controller to cross runway 29R. At the same time, the controller also permitted take off of another Vistara plane VTI725 operating the flight from runway 29R, the official said.
"Momentarily, tower controller forgot this crossing and issued take off clearance to another Vistara flight VTI725 (Delhi-Bagdogra) from runway 29R.
"On realisation of the error based on input from VTI926, the tower controller instructed VTI725 to cancel take off," the official said.
Vistara did not comment on the incident.
AI, Nepal Airlines flights avert mid-air collision
Pilot suspensions rose 2x in 2022: DGCA
'Blaming the pilot is the cheapest thing to do'
Spicejet-Emirates mid-air mishap averted
IndiGo planes avert mid-air collision over Bengaluru